This is a step sequencer module. It has an internal clock with it's own output as well as two programmable output channels. It has EEPROM save/load function (saves patterns after powering down), and a range of 2 to 32 steps.
LEDs, Pots, and Switches are all mounted to the PCB to minimize wiring while allowing for 1/4" and 1/8" jacks to be used with the same PCB. Can be used with 12V or 15V systems
For complete descriptions of the way the module is used, and how to build it, including schematics and parts list; download this PDF file.
Boards are available now. Price for 1 PCB/PIC set is $20.
Unfinished eurorack
panels are available for this project, they are 14HP and cost $9 each.
There is
more information here about panels. If you're interested in drilling your own panel for
this project, feel free to use my
drill guide. That image should be printed at 300dpi for proper
scaling.