MAKE A BUSSED ARRAY

Step 1. On the PCB footprint for the bussed array there is a pad marked "1." Vertically insert a resistor into the pad next to it, bend the lead down into pad 1 and solder into place.
Step 2. Insert a resistor into the next pad in the array. Trim the lead on the top and make an "L" or hook shape at the end of the lead. Wrap the end of the lead around the previous resistor and solder into place.
Step 3-X.Repeat step 2 until you've filled the rest of the pads in the footprint. You now have a bussed array!